80W 620x620mm LED light panel for Cassette Ceiling

Lightman led panel light adopts special circuit design, every LED can work separately, so it can avoid be influenced by a broken LED cause. And it use high brightness low decay Epistar SMD 2835 led chip with better heat dissipation, and also use Mitsubishi 3.0T light guide plate with light transmittance up to 90%. Our led flat panel lamp is fit for office lighting, supermarket lighting, hospital lighting etc. It is an ideal choice for customers.


  • Item: 620x620 LED Flat Panel Light
  • Power: 36W /40W /60W /80W
  • Input Voltage: AC85~265V / AC220V-240V, 50-60Hz
  • Color Temperature: Warm White, Natural White, Cool White
  • Lifespan: >50000 Hours
  • Product Detail

    Installation Guide

    Project Case

    Product video

    1. Product Features of LED Panel Light 80W.

    • A6063 aluminum alloy frame, anti-oxidation, strong, smooth texture, high temperature resistant.

    • Stable LEDs light source design solution: use the best 2835 LEDs -- high CRI, high brightness, and low light decay.

    • High efficiency constant current drive system, with heat protection system, can work under unstable voltage.

    • Special circuit design, avoided the single broken LED influence problem.

    • No infrared rays, no ultraviolet radiation, no thermal effect.

    • Ultra slim and unlimited design and various dimensions are available.

    • Instant start, no flickering, no humming, no RF interference.

    2. Product Specification:

    Model No

    PL-6262-36W

    PL-6262-40W

    PL-6262-60W

    PL-6262-80W

    Power Consumption

    36W

    40W

    60 W

    80W

    Luminous Flux (Lm)

    2880-3240lm

    3200-3600lm

    4800-5400lm

    6400-7200lm

    LED Qty(pcs)

    192pcs

    204pcs

    300pcs

    432pcs

    LED Type

    SMD 2835 

    Color Temperature (K)

    2700 – 6500K

    Color

    Warm/Natural/Cool White

    Dimension

    620x620x10mm

    Beam Angle (degree)

    >120°

    Light Efficiency (lm/w)

    >80lm/w

    CRI

     >80

    Power Factor

     >0.95

    Input Voltage

    AC 85V - 265V/AC220-240V

    Frequency Range (Hz)

    50 - 60Hz

    Working Environment

     Indoor

    Material of Body

    Aluminum alloy frame and PS diffuser

    IP Rating

    IP20

    Operating Temperature

    -20°~65°

    Dimmable

    Optional

    Life span

    50,000hours

    Warranty

    3 Years or 5 Years

     

    3. LED Panel Light Pictures: 

    1. 620x620 led panel 2. led panel light 62x62 3. non-flicker led panel 4. led panel light 62 62

    6. led 60x60-Product Detail

    7. led 595x595-Product Detail

    4. LED Panel Light Application:

    Our led panel light is widely used for commercial lighting, office lighting, hospital lighting, clean room lighting etc. It is popular to be installed in office, school, supermarket, hospital, factory and institution building etc.

    Recessed Installation Project:

    8. recessed led panel installation example

     

    Surface Mounted Project:

    9. surface mounted installation example

     

    Suspended Installation Project:

    10. suspended led panel installation example

     

    Wall Mounted Installation Project:

    11. wall mounted led panel installation example

     


  • Previous:
  • Next:

  • For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements. 12. Installation Guide

    Suspension Kit:

    The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.

    Items included in the Suspended Mount Kit:

    Items

    PL-SCK4

    PL-SCK6

    3030

    3060

    6060

    6262

    3012

    6012

    001

    X 2

    X 3

    002

    X 2

    X 3

    003

    X 2

    X 3

    004

    X 2

    X 3

    005

    X 4

    X 6

    Surface Mount Frame Kit:

    This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the three frame sides to the ceiling.  The LED panel is then slid in.  At last complete the installation by screwing the remaining side.

    The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.

    Items included in the Surface Mount Frame Kit:

    Items

    PL-SMK3030

    PL-SMK6030

    PL-SMK6060

    PL-SMK6262

    PL-SMK1230

    PL-SMK1260

    Frame Dimension

    302x305x50  mm

    302x605x50 mm

    602x605x50 mm

    622x625x50mm

    1202x305x50mm

    1202x605x50mm

    006

    Frame A

    L302 mm X 2 pcs

    L302mm X 2 pcs

    L602 mm X 2 pcs

    L622mm X 2 pcs

    L1202mm X 2 pcs

    L1202 mm X 2 pcs

    007

    Frame B

    L305 mm X 2 pcs

    L305 mm X 2 pcs

    L605mm X 2 pcs

    L625 mm X 2 pcs

    L305mm X 2 pcs

    L605mm X 2 pcs

    008

    X 8 pcs

    009

    X 4 pcs

    X 6 pcs

    Ceiling Mount Kit:

    The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall.  It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the clips to the ceiling / wall,  and the corresponding clips to the LED panel.  Then couple the clips .  At last complete the installation by placing the LED driver at the back of the LED panel.

    Items included in the Ceiling Mount Kits:

    Items

    PL-SMC4

    PL-SMC6

    3030

    3060

    6060

    6262

    3012

    6012

    010

    X 4

    X 6

    011

    X 4

    X 6

    012

    X 4

    X 6

    013

    X 4

    X 6

    014

    X 4

    X 6

    015

    X 4

    X 6

    016

    X 4

    X 6

    Spring Clips:

    The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.

    Items included:

    Items

    PL-RSC4

    PL-RSC6

    3030

    3060

    6060

    6262

    3012

    6012

    017

    X 4

    X 6

    018

    X 4

    X 6


    13. uk led panel light

    Store Lighting (UK)

    12. led panel ligt

    Library Lighting (UK)

    14. led panel light 60x120

    Tennis Club Lighting (China)

    Platform Corridor Picture

    Passway Lighting (Germany)



  • Write your message here and send it to us