IP65 72W Dimmable Recessed LED Grid Panel Light 30x120cm

The 30×120 flat panel lights can be up to 90lm/w, which is equivalent to a 200W incandescent therefore making the light panel incredibly energy efficient generating saving on both your energy bill and allowing you to trim your carbon footprint.


  • Item: 300x1200 2.4G Dimmable LED Panel Light
  • Power: 36W /40W /48W /54W /60W /72W /80W
  • Dimmable: 2.4G Dimmable
  • Color Temperature: Warm White, Natural White, Cool White
  • Lifespan: ≥50000 Hours
  • Product Detail

    Installation Guide

    Product video

    1.Product Introduction of 295x1195 2.4G Dimmable LED Panel Light.

    •By intelligent remote controller , Unlimited amount of panel lights can be allowed in 4 group and can respectively be turned on/off and dimming, without interfering with each other.

    •The intelligent remote dimming LED panel light can dimming, on/off, grouping through 2.4G RF intelligent remote controller, and the number of panel light is unlimited.

    •By intelligent remote controller , Unlimited amount of panel lights can be allowed in one group and can be turned on/off and dimming synchronously.

    •Lightman 2.4g led surface panel light 30*120 is with SMD 2835 LED chip with high lumen output 80lm/w-100lm per watt. Suitable application for offices, schools and hospitals etc.  Beautiful lighting appearance. High brightness lighting solution for direct replacement of T5 luminaire in most indoor applications.

    2. Product Parameter:

    Model No

    PL-30120-36W

    PL30120-40W

    PL-30120-48W

    PL-30120-54W

    Power Consumption

    36W

    40W

    48W

    54W

    Luminous Flux (Lm)

    28803240lm

    32003600lm

    38404320lm

    43204860lm

    LED Qty (pcs)

    192pcs

     204pcs

    252pcs

    280pcs

    LED Type

    SMD 2835 

    Color Temperature (K)

    2800 – 6500K

    Color

    Warm/Natural/Cool White

    Dimension

    1195x295x10mm

    Beam Angle (degree)

    >120°

    Light Efficiency (lm/w)

    >80lm/w

    CRI

     >80

    Power Factor

     >0.95

    Input Voltage

    AC 85V - 265V

    Frequency Range (Hz)

    50 - 60Hz

    Working Environment

     Indoor

    Material of Body

    Aluminum alloy frame and PS Diffuser

    IP Rating

    IP20

    Operating Temperature

    -20°~65°

    Dimmable

    2.4G Dimmable

    Life span

    50,000hours

    Warranty

    3 Years / 5 Years

    3.LED Panel Light Pictures:

    1. 1200x300 led panel light-natural white
    2. 1200x300 LED Panel Light with Suspensiton Kit
    3. 2.4g dimmable controller
    6. 30x120 led panel light testing
    5. led panel lamp
    6. led surface panel light

    4. LED Panel Light Application:

    Lightman led ceiling panel light is widely used for residential and commercial suspended grid ceilings, schools, hospitals, gymnasiums, hotels, basement lighting and new construction etc replaces existing fluorescent troffer light fixtures

    Recessed Installation Project:

    8. LED Ceiling Panel Light in Hospital

    Surface Mounted Installation Project:

    9. 30x120 led surface mounted panel light

    Suspended Installation Project:

    10. office led panel lighting

    Wall Mounted Installation Project:

    11. led panel light 30x120cm

  • Previous:
  • Next:

  • Installation Guide:

    For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.

    11. Installation Guide

    Suspension Kit:

    The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.

    Items included in the Suspended Mount Kit:

    Items

    PL-SCK4

    PL-SCK6

    3030

    3060

    6060

    6262

    3012

    6012

    3333

    X 2

    X 3

    4444

    X 2

    X 3

    5555

    X 2

    X 3

    6666

    X 2

    X 3

    7777

    X 4

    X 6

    Surface Mount Frame Kit:

    This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.

    The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.

    Items included in the Surface Mount Frame Kit:

    Items

    PL-SMK3030

    PL-SMK6030

    PL-SMK6060

    PL-SMK6262

    PL-SMK1230

    PL-SMK1260

    Frame Dimension

    302x305x50 mm

    302x605x50 mm

    602x605x50 mm

    622x625x50mm

    1202x305x50mm

    1202x605x50mm

    Frame A
    Frame A

    L302 mm
    X 2 pcs

    L302mm
    X 2 pcs

    L602 mm
    X 2 pcs

    L622mm
    X 2 pcs

    L1202mm
    X 2 pcs

    L1202 mm
    X 2 pcs

    Frame B
    Frame B

    L305 mm
    X 2 pcs

    L305 mm
    X 2 pcs

    L605mm
    X 2 pcs

    L625 mm
    X 2 pcs

    L305mm
    X 2 pcs

    L605mm
    X 2 pcs

    Frame c

    X 8 pcs

    Frame d

    X 4 pcs

    X 6 pcs

    Ceiling Mount Kit:

    The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.

    Items included in the Ceiling Mount Kits:

    Items

    PL-SMC4

    PL-SMC6

    3030

    3060

    6060

    6262

    3012

    6012

    111

    X 4

    X 6

    222

    X 4

    X 6

    333

    X 4

    X 6

    444

    X 4

    X 6

    555

    X 4

    X 6

    666

    X 4

    X 6

    777

    X 4

    X 6

    Spring Clips:

    The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

    First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.

    Items included:

    Items

    PL-RSC4

    PL-RSC6

    3030

    3060

    6060

    6262

    3012

    6012

    777

    X 4

    X 6

    777

    X 4

    X 6


    13. led lighting in subway

    Subway Lighting (China)

    16. surface mounted 30x120 led panel light

    kindergarten Lighting (Germany)

    15. germany led panel light

    Hospital Lighting (Germany)

    14. led office panel light 620x620

    Office Lighting (Germany)



    Write your message here and send it to us